Furuno FELCOM 12 manual EGC setup, Press 5 to display the EGC Setup screen, OFF Navtex

EGC setup

The FELCOM 12 receives EGC messages directed to its present po- sition and Navarea without further programming. The EGC Setup screen lets you select additional areas for which you wish to receive messages and also the Navtex station and type of message for Coastal Warning (NAVTEX Re-broadcast).

1. Press [F8] to display the Setup menu.

File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm

Setup

1.Distress Alert Setup

2.System Setup

3.Editor Setup

4.Terminal Setup

5.EGC Setup

6.Auto Mode Setup

7.E-Mail Setup

8.Directories

9.Configuration

Figure 2-20 Setup menu

2. Press [5] to display the EGC Setup screen.

	Setup		EGC Setup
Receive EGC Area
Additional Position				:	:
	Navarea
Fixed Area
Waypoint (from NAV Equipment)				OFF
NAVTEX
Station Code
Type of Message (Can’t reject other report)
Ice reports		OFF		OMEGA messages		OFF
Meteo. forecasts		OFF		SATNAV messages		OFF
Pilot service		OFF		Other navaid msg		OFF
DECCA messages		OFF		QRU (no message)		OFF
LORAN messages		OFF

Figure 2-21 EGC setup screen

The cursor is on the Additional Position line, where you can enter L/L position of an ocean region you want to receive broadcasts for.

3.Press [Enter] to open the additional position window.

4.Enter positions as follows.

a)Enter latitude.

b)Enter [N] or [S].

c)Enter longitude.

d)Enter [E] or [W].

2-12