Furuno FELCOM 12 manual Aborting an Operation, Press 3 to select Abort

OTHER FUNCTIONS

This chapter describes how to abort operation, scan NCS and select

EGC and NCS channels.

Aborting an Operation

You can abort transmission, receiving or scanning during operation.

1. Press [F7] to display the Options menu.

Options

1. Login

2. Logout

3. Abort

4. Select NCS

5. Ocean Region

6. Test

Figure 7-1 Options menu

Note: If the FELCOM 12 is set to operate as an EGC-only re- ceiver, the menu looks like this:

Options

1. Login

2. Logout

3. Abort

4. Select EGC Ch.

5. Test

Figure 7-2 Options menu, EGC-only receiver status

2. Press [3] to select Abort.

Options

Abort

Start

Yes No

Figure 7-3 Abort screen

3.Press [Enter] to abort. (The message “Forced Clearing” replaces either Sending, Receiving or Scanning at the bottom of the screen.)

Note: Aborting is possible in sending, receiving or scanning. If attempted in other operating modes “Cannot abort cur- rent process.” appears.

7-1