Furuno FELCOM 12 manual Press Enter to close selection window

3.Press [Enter] or [1] to display the Transmit Message menu. The cursor is on the Priority line and “Normal” is selected.

File Edit Transmit EGC

Transmit

Reports Logs Options Setup Position StopAlarm

<[1] UNTITLED1>

Transmit Message

	Priority	Normal
	Message File	Message now being edited	Size	24
	Station Name
	Destination Type	TELEX
	Prefix Code
	Country/Ocean Code
	Station ID
	Modem Type
----	Address
	Subject
	Attach File
	LES ID
	Option
	[ TRANSMIT	]

Figure 4-2 Transmit message menu

Note: An error message may appear under the conditions below:

Unit is not logged-in. -Error message: Cannot start to send. (not logged-in)

Unit operates as an EGC-only receiver-Error Message: Cannot start to send. (EGC receiver)

The message file line displays “Message now being edited” when a file is currently displayed.

4.Press [ line.

/

] three times to place the cursor on the Destination Type

5.Press [Enter] to open the selection window.

6.Select Destination Type among “TELEX”, “FAX” or “SPEC (Prefixed)”.

		Transmit		<[1] UNTITLED1>
					Transmit Message
	Priority		Normal
	Message File		Message now being edited				Size	24
	Station Name
	Destination Type		TELEX
	Prefix Code		FAX
	Country/Ocean Code		E-Mail
	Station ID		CSDN
	Modem Type		PSDN
			X400
----	Address
			DNID
	Subject
			SPEC
	Attach File
			TELEX			(Prefixed)
	LES ID
			FAX			(Prefixed)
	Option
			PSDN			(Prefixed)
			X400			(Prefixed)
	[ TRANSMIT ]		DNID			(Prefixed)
			SPEC			(Prefixed)

Figure 4-3 Transmit message menu, destination type window

7. Press [Enter] to close selection window.

4-3