Transition Networks MIL-SM2401MAF manual Port Mirroring Commands Set

No snmp-server				Switch(config)# no
host [IP				snmp-server host
address]				192.168.1.50
community				community public
[word]
snmp	Global	Set SNMP agent		Switch (config)#
system-name	configuration		N/A	snmp system-name
		system name
[word]	mode			l2switch

￿Port Mirroring Commands Set

Commands	Command	Description	Defaults	Example
	Level
		Use the port
		monitor interface
		configuration
		command to
port monitor		enable Switch		Switch (config)#
[RXTXboth]	Interface	Port Analyzer		Interface fastEthernet
[port ID]	configuration	(SPAN) port	N/A	0/8
Or	mode	monitoring on a		Switch (config-if)# port
no port monitor		port. Use the no		monitor both 3
		form of this
		command to
		return the port to
		its default value.

47