Transition Networks MIL-SM2401MAF Set bandwidth in or out, Switch config#, Interface, interface

		Set bandwidth in or out		Switch (config)#
		rate. The value rage is
	Interface			interface
Bandwidth [in		(0~999), and zero of
	configuration		Disable	fastEthernet 0/1
out] [value]		the value is disable
	mode			Switch (config-if)#
		(The module can’t be
				bandwidth in 50
		setting)
		Use the state interface
		configuration		Switch (config)#
		command to specify
	Interface			interface
State [Enable		the state mode of
	configuration		Enable	fastEthernet 0/1
Disable]		operation for Ethernet
	mode			Switch (config-if)#
		ports. Use the disable
				state disable
		form of this command
		to disable the port.
				Switch (config)#
	Interface			interface
show interface		show interface		fastEthernet 0/1
	configuration
configuration		configuration status		Switch (config-if)#
	mode
				show interface
				configuration

27