Traulsen UL Series, UC Series VII. l Setting the Date, VII. m Setting Daylight Savings Time

VII. INTELA-TRAUL®(continued)

VII. l - SETTING THE DATE:

The date must be set in order for the data storage memory to correctly log events. Follow the instruc-

tions to enter the customer access code on page 9. When the control displays									Thermostat
Set Point High, press the down arrow key						until the control display reads		Date.		Press
the set button SET .			The display will show				(year). The right two numbers will be flashing.
Press the arrow keys					to set the year. When the correct year is displayed, press the set
button SET .	The display will show					(month). The right two numbers will be flashing. Use
the arrow keys				to set the month.		When the correct month is displayed, press the set
button SET .		The display will show				(day). The right two numbers will be flashing.				Press

the arrow keys to set the day. When the correct day is displayed, press the set button

SET . The display will then read Thermostat Set Point High. You can use the up or down

arrow keys	to scroll to the next parameter, press the alarm cancel button to exit	) .
		))

VII. m - SETTING DAYLIGHT SAVINGS TIME:

This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings Time. Follow the instructions to enter the customer access code on page 9. When the control dis-

plays			Thermostat Set Point High, press the down arrow key			until the display reads
		Daylight Savings Time. Press the set button SET		. The display will show			Day-
light Savings Time (Yes, automatically adjust for Daylight Savings Time).						For “YES” press the set
	SET , for “NO” press the up or down arrow key
button					. The display will read

Dayligt Savings Time (no). Press the set button SET . The display will read Thermostat

Set Point High. You can press the the up or down arrow keys to scroll to the next param- eter or press the alarm cancel button to exit ))) .

-14-