Triax SR 322 4 A/V Setting, V Output, Scart Screen Type, Pdif Output, TV Type, RF Channel

4.4 System Setting

4.4.4 A/V Setting

•Press the UP/DOWN buttons on the Setup list to select Display and press the OK button.

•Press the UP/DOWN button to select either Screen Type, Menu Transparency, SCART Output, SPDIF Output, RF Channel, RF Mode or TV Type and then press the RIGHT button to move to the right pop-up menu.

ƇTV

If you have a TV set with 4:3 picture format, select 4:3 TV and if you have a TV set With 16:9 picture format, select 16:9 TV.

ƇScreen Type

If you have a TV set with the 4:3 picture format and the transmission is in 16:9, you can select Full, letterbox and Cinema.

If you have a TV set with the 16:9 picture format and the transmission is in 4:3, you can select Full, Pilar Box and Cinema.

Select the aspect ratio of TV which is connected to the receiver and then press the OK button.

ƇA/V Output

If your TV input supports SCART-RGB control, select SCART-RGB.

Otherwise select SCART-CVBS. If your TV input supports S-VHS, select

S-VHS.

ƇScart Screen Type

Select Your Scart Screen Type.

You can select from 4:3 and 16:9 and then press the OK button.

ƇS/PDIF Output

You can hear digital audio of the Dolby 5.1 channel using S/PDIF

Output.

•If selecting Off, the digital audio will not be output.

•When selecting PCM, the unzipped digital audio is output through S/PDIF.

•When selecting Dolby Digital, if the current channel is a Dolby audio channel, the zipped Dolby stream is output through S/PDIF.

ƇTV Type

Select your TY Type. You can choose from Multi, NTSC, SECAM or PAL. Press the UP/DOWN button to select from Multi, NTSC, SECAM or PAL and then press the OK button.

ƇRF Channel

Select this alternative if you have to change the RF channel.

Select an UHF Channel you want with the UP/DOWN buttons.

The RF Channel ranges from 21 to 69.

30