SETTING THE CONTROLS FOR AUTOMATIC USE

This is very easy. All you have to do is work through the steps below. The clock will work out the rest for itself.

1Is the electricity supply on?

2Is the clock

showing the

To adjust turn the selector knob

correct time?

to 'manual' then turn to 'clock'.

 

Turn the setting knob in either

 

direction.

3How long will the food take to cook?

Turn the selector knob to 'cook'. Then turn the setting knob until the length of time you want the food to cook shows in the display. The maximum cooking time is 10 hours. 'Auto' will show in the display.

4What time do you want the food to be cooked by?

Turn the selector knob to 'Stop'. Turn the setting knob until the time the oven is to switch off shows in the display. The

cookpot ( ) will go out.

The 'Stop' time must not be more than 23 hours 59 minutes from the time of day. For example if the time of day is

9.00am the latest 'Stop' time will be 8.59 am the next day.

5

Set to

Turn the timer selector knob to

 

automatic.

'Auto'.

 

 

 

6

Turn on the

Turn the oven control to the

 

oven control.

required setting and select

 

 

required function.

The time shown on the right gives an example of setting the automatic controls when the time is 9.00 am, the food is to be cooked for 2½ hours and the food is needed at 6.00 pm (1800 hours).

The clock will work out what time the oven will switch itself on and it will turn the oven off at the end. Once the automatic sequence is finished there will be an alarm to remind you that you need to set the oven for manual operation. To do this turn the timer selector knob to 'manual'. Turn off the oven controls.

If you change your mind and want to cancel a programme that you have set simply turn to 'clock' and then to 'manual'.

18

Page 18
Image 18
Tricity Bendix BS 631/2 installation instructions Setting the Controls for Automatic USE