DSM 132/132RS Receiver User Guide 47
Getting Started 4
41.1 Satellite DGPS mode
In this manual, references to Satellite DGPS apply only to the
DSM 132 receiver. When the receiver is in Beacon DGPS mode, a B,
Beacon Searching, Beacon Tracking, or Beacon FFT message appears in the
lower-left corner of the screen. To change between modes, press 4
and hold for five seconds. To display satellite differential information,
press 4 until an S appears in the lower left corner of the screen.
41.2 Satellite and WAAS/EGNOS DGPS mode
The DSM 132 can receive Beacon, L-band, and WAAS/EGNOS
DGPS signals. The Home screen indicates which mode the receiver is
in for differential correction.
Figure 4.9 explains the GPS status indicators that can appear on the
first line of the Home screen display.
Figure 4.9 GPS status
D/3D í07 DOP03
Current PDOP value
Number of GPS satellite vehicles (SVs) being
tracked
Position Type