Trimble Outdoors 132, 132RS Press for Omni* Activation

5 Configuring the Receiver
66 DSM 132/132RS Receiver User Guide
If automatic activation fails, try to activate OmniSTAR DGPS
manually, as described below. If you cannot activate the OmniSTAR
differential service, contact your local Trimble Reseller.
Activating OmniSTAR manually
Note – If the receiver is activated automatically, this option is not
available.
If over-the-air activation fails, or if you want to activate the
OmniSTAR differential service manually, obtain an activation code
from OmniSTAR:
1. Contact OmniSTAR for the activation code and satellite
coverage beam for your location. See Paid Subscription
Services, page 63. You will need to provide a serial number.
Note the activation number here:
Note the satellite coverage beam here:
2. From the DGPS Config screen, press 2 until the Omni* screen
appears:
3. Press 4 twice. In the screen that appears, the active cursor
highlights the first digit.
4. Press 1 or 2 to change the number.
5. Press 3 to select the next digit.
6. Repeat steps Step 4 and Step 5 to enter all 24 numbers.
7. Press 4 to save the changes.
8. Press 5 to return to the DGPS Config menu.
åæ Press Ð for
Omni* Activation