DSM 132/132RS Receiver User Guide 73
Configuring the Receiver 5
4. Press 4 to save the changes.
5. Press 3 to select the Beacon Channel 1 field.
6. Repeat step 3 to enter the other required frequency.
7. Press 4 to save changes.
5.1 Configuring Other DGPS Corrections
To configure for RTCM SC104 Differential corrections to be received
on Port A or Port B:
1. Navigate to the Configuration menu.
2. Navigate to the Port A Config screen (or Port B Config screen).
3. Select a suitable port (for example, Port A In/Out) and then use
the menu keys to specify RTCM as the input (I).
4. The DSM 132 is now configured to use any incoming DGPS
corrections on the selected port.
Note – This happens even though the data displayed by the
DGPS Source screen shows the source of the DGPS to be either
Beacon, L-band, or WAAS/EGNOS.
5.1 Configuring DGPS Base Station
You may need this option when working in a remote location where
satellite differential correction and/or beacon tower differential
correction is not available.
If you have not yet done so, install the latest version of
FlashLoader 100 on the office computer. See page56.