A Troubleshooting
88 DSM 132/132RS Receiver User Quide
Tracking but not receiving a
differential signal
The receiver is tracking satellites and
tracking an OmniSTAR or Thales
satellite beam, but is not receiving
DGPS signals.
You need to check that your DGPS service
subscription is still current and enabled.
For OmniSTAR service:
1. Navigate to the Omni Srv Info screen and press
4 until Stop Date appears.
2. If the message Access Unknown appears,
contact OmniSTAR to reactivate your
subscription.
For Thales service:
1. Navigate to the Thales Srv Info screen and
press 4 once.
2. If the message Access Unknown appears,
contact Thales to reactivate your subscription.
For more information, see Paid Subscription
Services, page63.
The receiver must be switched on and configured to
track the correct satellite coverage beam before it
can be reactivated.
When a satellite subscription is activated the Home
screen displays D/3D.
No GPS position output from the
receiver after connecting to
AgRemote
When the receiver is connected to
AgRemote, the port communication
settings are automatically reset to
TSIP 8-O-1 for both input and output.
However most devices and software
programs accept NMEA 4800-8-N-1
output as standard.
Connect AgRemote. Then reset the port
communication settings to NMEA output. For more
information, see Configuring the Communication
Ports, page57.
Problem / issue Possible solution