Trimble Outdoors 132, 132RS - page 63

DSM 132/132RS Receiver User Guide 63
Configuring the Receiver 5
You can use one of these paid services as an alternative to
WAAS/EGNOS. They both provide over-the-air DGPS
activation.
• Other source of RTCM SC-104 corrections; for example, a
DSM 132RS over a radio data link.
For more information, see Differential GPS (DGPS), page 19.
To use the differential signal from the selected provider:
1. Configure the receiver.
2. Activate the receiver.
3. Enable the receiver.
For details, see the following sections.
To configure the receiver to receive signals from any provider:
1. Navigate to the DGPS Config menu:
2. Press 2.
3. Follow the steps in the appropriate section below. Each section
describes how to configure, activate, and enable the receiver for
a particular provider.
5.1 Paid Subscription Services
When you obtain a paid satellite subscription, contact the service
provider for the correct satellite coverage beam for your geographic
location.
In the U.S. and Canada, contact:
• OmniSTAR at 1- 888-883-8476
www.omnistar.com