Tripp Lite 93-2879, B096-048, B096-016 owner manual Power Strip Control, PowerMan

443stream tcp nowait root sslwrap -cert /etc/config/ssl_cert.pem -key /etc/config/ssl_key.pem -exec /bin/httpd /home/httpd"

Save the file and signal inetd of the configuration change.

kill -HUP `cat /var/run/inetd.pid`

The HTTPS server should be accessible from a web client at a URL similar to this: https://<common name of unit>

More detailed documentation about the openssl utility can be found at the website: http://www.openssl.org/

15.9 Power Strip Control

The Console Server supports a growing list of remote power-control devices (RPCs) which can be configured using the Management Console as described in Chapter 8. These RPCs are controlled using the open source NUT and PowerMan tools and the pmpower utility.

PowerMan

PowerMan provides power management in a data center or compute cluster environment. It performs operations such as power on, power off, and power cycle via remote power controller (RPC) devices. Target hostnames are mapped to plugs on RPC devices in powerman.conf powerman - power on/off nodes

Synopsis

powerman [-option] [targets] pm [-option] [targets]

Options
-1, --on	Power ON targets.
-0, --off	Power OFF targets.
-c, --cycle	Power cycle targets.
-r, --reset	Assert hardware reset for targets (if implemented by RPC).
-f, --flash	Turn beacon ON for targets (if implemented by RPC).
-u, --unflash	Turn beacon OFF for targets (if implemented by RPC).
-l, --list	List available targets. If possible, output will be compressed into a host range
(see TARGET SPECIFICATION below).
-q, --query	Query plug status of targets. If none specified, query all targets. Status is not
	cached; each time this option is used, powermand queries the appropriate RPC's.

_____________________________________________________________________

B096-016 B096-048 and B092-016 User Manual Page 192