15.1 Advanced Portmanager
pmshell
The pmshell command acts similarly to the standard tip or cu commands, but all serial port access is directed via the portmanager.
Example:
To connect to port 8 via the portmanager:
# pmshell -l port08
pmshell Commands:
Once connected, the pmshell command supports a subset of the '~' escape commands that tip/cu support. For SSH, you must prefix the escape with an additional ‘~’ command (i.e. use the ‘~~’ escape)
Send Break:
Typing the character sequence '~b' will generate a BREAK on the serial port.
History:
Typing the character sequence '~h' will generate a history on the serial port.
Quit pmshell:
Typing the character sequence '~.' will exit from pmshell.
Set RTS to 1 run the command:
# pmshell
Show all signa
# pmshell
DSR=1 DTR=1 CTS=1 RTS=1 DCD=0
Read a line of text from the serial port:
# pmshell
_____________________________________________________________________
Page 169 |