Tripp Lite B096-048, 93-2879, B096-016 owner manual Set up SDT Serial Ports on Console Server

Note The above notes describe setting up an incoming connection for Windows XP. The steps are the same for Windows 2003, except that the setup screens present slightly differently:

Put a check in the box for Always allow directly connected devices such as palmtop…..

Also, the option to Set up an advanced connection is not available in Windows 2003 if RRAS is configured. If RRAS has been configured, it is a simple task to enable the null modem connection for the dial-in configuration.

C.For earlier version Windows computers, follow the steps in Section B, above. To get to the Make New Connection button:

For Windows 2000, click Start and select Settings. At the Dial-Up Networking Folder, click Network and Dial-up Connections and click Make New Connection. Note: you first may need to set up a connection over the COM port using Connect directly to another computer before proceeding to Set up an advanced connection

For Windows 98, you double-click My Computer on the Desktop, then open Dial-Up Networking and double-click

6.10.2Set up SDT Serial Ports on Console Server

To set up RDP (and VNC) forwarding on the Console Server’s Serial Port that is connected to the Windows computer COM port:

Select the Serial & Network: Serial Port menu option and click Edit (for the particular Serial Port that is connected to the Windows computer COM port)

91