OSD Operation
On Screen Display (OSD), provides a menu driven interface to handle the PC switching procedure. While Hot Key switching still works, using OSD is a great deal more convenient - especially in large, daisy chained installations.
All operations start from the OSD Main Menu. To pop up the Main Menu, tap either of the Ctrl keys twice:
List: All |
|
|
|
|
SN- PN | QV | PC | NAME |
|
+ | ADMINST | |||
|
| |||
+ | MAIL SERVER |
| ||
| + | WEB SERVER |
| |
+ | FTP SERVER |
| ||
| + | NET ADMINIT |
| |
+ | FILE SERVER 1 | |||
+ | FILE SERVER 2 | |||
| F1 | F2 | F3 | F4 | F5 | F6 |
|
|
| ||||||
| GOTO | SCAN | LIST | QVSW | EDIT | SET |
|
•OSD always starts in List view, with the highlight bar at the same position it was in the last time it was closed.
•From the Main Menu, you can go directly to any port by either keying in its Port ID (Station Number - Port Number), and pressing [Enter], or by double clicking on it with the mouse.
Navigation
•To dismiss the menu, and deactivate OSD, press [Esc]
•Use the Up and Down Arrow Keys to move up or down through the list one line at a time
•Use [Pg Up] and [Pg Dn] to move up or down through the list one screen at a time
•Click on to move up or down through the list one line at a time
•Click on to move up or down through the list one screen at a time
•To activate a port, move the Highlight Bar to it then press [Enter] or Double Click with the left mouse button.
OSD Main Menu Headings:
Lists the Port ID numbers (Station Number – Port Number) for all the CPU Ports on the | |
| installation. To access a particular PC, use the Navigation Keys or the Mouse to move the |
| Highlight Bar to the desired location and then press [Enter]. |
QV | Ports that have been selected for Quick View Scan Mode (see F2 and F4 below) are |
| identified by an arrowhead in this column. |
PC | Lists all the PCs that are Powered On and are On Line. |
Name | If a port has been given a name (see F5 below), the name appears in this column. |
The Function Keys:
Function Keys bring up submenus that is used to configure and control the OSD.
• F1 GoTo:
Pressing [F1] allows you to switch directly to a port by the following methods:
a)Move the Highlight Bar to the desired port and press [Enter] or Double Click with the left mouse button.
b)Key in the Port ID or Name, then press [Enter].
Note: GoTo narrows the list of available choices as you type the name. For example, if the first letter you type is a, the list only displays those ports whose names begin with “a”. If the next letter you type is “b”, the list is further narrowed down to only those ports whose names begin with ab, etc.
To return to the OSD Main Menu without making a choice, press [Esc].
