5. Installation (continued)
5.6.4
6.Click the Remote View button to initiate a remote session, which will open with the remote OSD displayed. The remote OSD contains most of the features that are contained in the Web Management
Interface, but it is presented in a different format.
7.Click on the Administration tab at the top of the screen. On this page, click on the Network Icon 
to pull up the Network page. From here, a fixed IP address can be assigned in the same way as when using a web browser (See steps 5 through 8 in the Browser section).
6.KVM Operation
6.1Local Console Login
When accessing the console KVM switch for the first time, a prompt will appear asking for a username and password. The default username is administrator, and the default password is password. For security purposes, it is strongly recommended that you change the username and password on this account to something unique. Once the KVM has been set up and user accounts have been created, the login prompt will only appear when a user logs out of the KVM. When you have entered your username and password, the OSD will appear with the following page displayed.
Note: 1. The screenshot depicts the Administrator’s Main Screen. The User Main Screen does not have the F4 and F6 functions, since they can’t be accessed by ordinary Users and are reserved for the Administrator.
2.OSD always starts in List view, with the highlight bar at the same position it was when the OSD was last closed.
3.Only the ports that have been set accessible by the Administrator for the currently logged in User are visible.
4.If the port list is collapsed into stations, simply click on the plus sign next to the desired station number, or highlight the desired station number and hit the [Enter] key.
6.2Local Console Port Access
Once logged into the KVM, you can access connected computers via the local console using the Local Console OSD, Local Console Pushbuttons or Hotkey Commands.
6.2.1 Local Console OSD Invocation Sequence
Once logged into the KVM switch and accessing a connected computer, you will need to use one of two sequences to
10
