Basic Operation continued
“ENTER/MUTE” Button
To toggle settings options while viewing a control menu option, tap this button. The UPS power failure alarm can also be temporarily silenced by tapping this button. Once silenced, an alarm will automatically
•Can be used in conjunction with the ON/OFF button to cancel the “OFF” function. See “ON/OFF Button” instructions above.
•Can be used in conjunction with the ENTER/MUTE button to restore the LCD to Factory Mode. See “ON/OFF Button” instructions.
Note:
Battery Capacity: This will be active in all “Display” modes, but is not shown in “Control” modes.
AC Input: This indicates that the unit is running in Line Mode and supplying AC power to equipment connected to the output.
Battery Input: This will flash to indicate that the UPS is not receiving AC input and is running in inverter mode. The Battery Input icon is also used in conjunction with the EVENTS icon to indicate On Battery events.
Replace Battery Icon: In the event that UPS batteries expire and require replacement, this icon and the warning icon will flash. This icon will also flash after a failed UPS
Warning: This will flash to let the user know that there’s a warning condition and immediate action must be taken:
1.For Replace Battery: Replace Battery and Warning icons flash during any normal “Display” mode.
2.For Overload: Load, Warning and Load Percentage icons will flash, the alarm will sound repeatedly and the LCD screen will switch from the
EVENTS Icon: Displayed in conjunction with the AVR icon and BATT icons to indicate the number of On Battery or AVR events that have occurred.
Alarm Off: Indicates that the alarm is disabled.
Alarm On: Indicates that the alarm is enabled.
10
| 12/26/2012 3:47:31 PM |