Tripp Lite SMART2600RM2U, SMART3000RM2UP, SMART3000RMXL2U, SMART2200RMXL2U Battery Replacement

Battery Replacement

Under normal conditions, the original batteries in your UPS will last many years. See Safety section before replacing batteries. The batteries are designed for hot-swap replacement (i.e. leaving the UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode and disconnect equipment before proceeding. Note: Refer to the label on the battery retention plate for the R.B.C. part number.

SMART3000RM2UP and SMART3000RMXL2U Battery (RBC58-2U) Replacement Procedure

1Remove Front Panel

1	4 x screws
2	Remove Battery Retention Plate

4Remove/Recycle Batteries

First, 4A remove the left row of batteries. Then, 4B slide the right row of batteries to the left and remove.

4A

24 x screws

3Disconnect Batteries

4B

3

18

12-12-037-93-3088-B.indb 18 12/26/2012 3:47:37 PM