Whenever your UPS is automatically correcting high or low AC line voltage, this green light will turn ON and the UPS will gently click. The more the UPS has to correct voltage, the more the green light will turn ON and the more the UPS will click. These are both normal, automatic operations of your UPS, and no action is required on your part.

This red light will turn ON if your UPS fails a self-test and/or the UPS battery is less than fully charged. Let the UPS charge for 12 hours and perform a second self-test. If the light continues to stay on, contact Tripp Lite for service.

This multi-colored light displays 4 separate UPS load conditions. It will turn from green (low) to yellow (medium) to red (high) as you connect equipment to show you the load level your UPS is supporting. When the light is red, your UPS is supporting a load above 85% of its capacity. If the red light begins flashing, then your UPS is severely overloaded. Remove overload immediately until light stops flashing.

Other UPS Features

AC Receptacles

The receptacles provide your connected equipment with AC line power during normal operation and battery power during black- outs and brownouts. They also protect your equipment against damaging surges and line noise. You can remotely reboot con- nected equipment by turning all of the receptacles OFF and ON at once using Tripp Lite UPS software. Select models, however, feature a unique “Remote Reboot Outlet” (identified on the back panel of your UPS) which allows you to use Tripp Lite UPS software to remotely reboot equipment connected to this outlet without interrupting power to equipment connected to the other outlets. See software instructions for details.

Note: constant power is available at the Remote Reboot Outlet (and all other outlets) unless controlled through Tripp Lite UPS software.

RS-232 Port

This port, labeled "LAN 4.1" on the UPS, connects your UPS to a workstation or server. Use with Tripp Lite software and cabling to monitor and manage network power and automatically save open files and shut down equipment during a blackout. This port uses RS-232 communications to transmit UPS and power conditions (Pin 7 = Transmit; Pin 8 = Common; Pin 9 = Receive). Contact Tripp Lite Customer Support for more information and a list of available SNMP, network management and connectivity products.

Contact Closure Ports

These ports, labeled "LAN 2.2" on the UPS, are also used to connect your UPS to a workstation or server. Use with Tripp Lite software and cabling to automatically save open files and shut down equipment during a blackout. This port uses contact- closure signals to indicate line-fail and low-battery status. Contact Tripp Lite Customer Support for more information.

6

Page 5 Page 7
Page 6
Image 6
Tripp Lite XL INT specifications AC Receptacles, RS-232 Port, Contact Closure Ports
Page 5 Page 7

XL INT specifications

Tripp Lite XL INT is a cutting-edge power management and connectivity solution designed to meet the demands of modern technology environments. Whether for home, office, or industrial use, the XL INT series incorporates advanced features that ensure reliability, efficiency, and safety in power handling and distribution.

One of the cornerstone features of the Tripp Lite XL INT is its robust surge protection. Equipped with advanced surge suppression technology, it defends sensitive electronic devices from power spikes and surges, significantly prolonging the lifespan of connected equipment. This is particularly crucial in areas prone to electrical storms or unstable power sources.

Another notable characteristic is the integrated network monitoring capabilities. The XL INT provides real-time information about power usage, energy consumption, and any anomalies within the electrical system. This feature empowers users to make informed decisions about energy management, contributing to both cost savings and environmental efficiency.

The XL INT series also boasts multiple outlets, including USB ports, allowing users to connect a variety of devices simultaneously. The intelligently designed layout ensures that even large plugs can fit without blocking adjacent sockets, enhancing versatility in use. Compatibility with a wide range of devices—from computers and printers to networking equipment—makes it an ideal choice for both personal and professional settings.

In terms of build quality, Tripp Lite ensures that the XL INT is both rugged and aesthetically pleasing. Its durable construction is resistant to wear and tear, making it ideal for busy workspaces. The sleek design also allows it to blend seamlessly into any environment, whether it be an office desk or a server room.

Safety features are paramount in the design of the XL INT. It includes thermal shutdown technology, which automatically disconnects power in the event of overheating, thus preventing potential hazards. Additionally, the unit complies with various safety standards and certifications, ensuring peace of mind for users.

Overall, Tripp Lite XL INT serves as a reliable and efficient power management solution. Its comprehensive features, robust design, and innovative technologies make it a leader in the power protection and management field. For those looking to enhance their workspace with a dependable and intelligent power solution, the Tripp Lite XL INT stands out as a premier choice.
Top Page Image Contents