Troy-Bilt 1400 warranty Clearing a Clogged Discharge Chute, To clear the chute

2.Position the chute assembly opening by using the chute handle to throw the snow in the desired direction. See Figure 5-3.

Figure 5-3

Clearing a Clogged Discharge Chute

WARNING! Never use your hands to clear a clogged chute assembly. Shut off motor, disconnect power cord, and remain behind handle until all

moving parts have stopped before using a clean-out tool or stick to clear the chute assembly.

Hand contact with the rotating auger inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the discharge chute.

To clear the chute:

1.SHUT THE MOTOR OFF AND DISCONNECT POWER CORD!

2.Wait 10 seconds to be sure the auger has stopped rotating.

3.Always use a clean-out tool or stick, not your hands.

Section 5 — Operation

13