4.Begin the removal the reverse tine belt as follows:

a.Apply pressure on the idler pulleys to relieve tension on the reverse tine cable and the wheel drive cable.

b.Carefully unhook each cable-end.

5.Unloop the wheel drive belt from around the engine pulley.

6.Unloop the reverse tine belt from the engine pulley.

NOTE: Replace the reverse tine belt first and the forward tine belt second. Lastly, reattach the wheel drive belt to the engine pulley or proceed by replacing it.

NOTE: To install replacement belts, perform steps 1-6 in reverse order.

4

a

b

5

6

19

Page 19
Image 19
Troy-Bilt 654J manual