RULES FOR SAFE OPERATION
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating, maintenance,` and repair information.
SYMBOL MEANINGSYMBOL MEANING
| • SAFETY ALERT SYMBOL |
|
|
|
| • ON/OFF STOP CONTROL |
|
|
|
|
| ||
| Indicates danger, warning or caution. May be used in |
|
|
|
| ON / START / RUN |
| conjunction with other symbols or pictographs. |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
• WARNING: READ OPERATOR'S MANUAL
Read the operator’s manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders.
• WEAR EYE AND HEARING PROTECTION
WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1 standards and ear protection when operating this unit. Use a full face shield when needed.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
• OIL
Refer to operator’s manual for the proper type of oil.
• ON/OFF STOP CONTROL
OFF or STOP
• KEEP BYSTANDERS AWAY
WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1 standards and ear protection when operating this unit. Use a full face shield when needed.
• THROWN OBJECTS CAN CAUSE SEVERE INJURY
WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1 standards and ear protection when operating this unit. Use a full face shield when needed.
• CHOKE CONTROL
1. • FULL choke position
2.• PARTIAL choke position
3.• RUN choke position
•HOT SURFACE WARNING
Do not touch a hot surface. You may get burned. These parts get extremely hot from operation. They remain hot for a short time after the unit is turned off.
4