ASSEMBLY INSTRUCTIONS
The completed blower tube should look like Figure 6.
Elbow Tube | Hose Clamp |
|
Adjusting the Handle
1.Rotate the throttle grip counterclockwise around the blower tube until it is pointing directly downward (Fig. 7, A).
WARNING: Do not rotate the handle clockwise to adjust. This may cause the throttle cables to disconnect from the throttle grip or the engine.
Flex Tube
Hose Clamp
Upper Blower Tube
Throttle Cables
On/Off Switch
B
A 
Fig. 7
2. | Pull or push the throttle grip along the handle tube until its |
| distance from the backpack blower is comfortable (Fig. 7, B). |
3. | Align the throttle grip with the slot closest to the comfortable |
| place and rotate the throttle grip clockwise into the upright |
Throttle Grip
position (Fig. 8). |
First Lower
Blower Tube
Fig. 8
Second Lower
Blower Tube
Nozzle
Fig. 6
WARNING: To avoid serious personal injury, make sure that the blower tubes are locked in place or firmly installed.
7