Trust Computer Products IBM 802.11a/b/g Wireless CardBus Adapter Appendix A. LED information

Appendix A. LED information

Your IBM 11a/b/g Wireless CardBus Adapter provides two Light Emitting Diodes (LEDs), a Power LED, and a Network LED. These LEDs indicate power and activity status of the CardBus Adapter.

Power LED	Network LED	Description
Slow blink	OFF	Power Save Mode: The CardBus Adapter enters
		this mode after power-up or reset.
ON	OFF	Awake Mode: The CardBus Adapter
		automatically enters this mode after exiting from
		power save mode. Changes from power save
		mode to this mode might not be visible on the
		LEDs if the software assumes control of the LED
		blinking by writing to the PCI configuration
		register.
Alternate blink	Alternate blink	CardBus Adapter is looking for a network
		association.
Slow blink	Slow blink	CardBus Adapter is associated with a network,
		but no activity is occurring.
Fast blink	Fast blink	CardBus Adapter is associated with a network
		and activity is occurring. Blink rate increases as
		activity increases on the network, over the air, or
		locally on the network device, based on the
		setting of the PCI configuration register.
OFF	OFF	Power is not being applied to the CardBus
		Adapter.

© Copyright IBM Corp. 2003 23