O W N E R ' S M A N U A L • C 8 0
Fasten the front frame support to the front frame with two allen screws (A) and base plates (B).
FRONT FRAME
1.Connect the cords from the front and rear frame tube with each other.
2. Connect the frame tubes with each other.
PLEASE NOTE: Do not damage the console cord!
3. Tightly fasten the frame tubes with four allen screws (C).
HANDLES
1.Remove the holder from the shaft end.
2 .Set the handle at the end of the shaft and thread the adjustment key cord from the handle over the shaft into the front frame tube.
3. Lock the handle by fastening the base plate (D) and the allen screw (E) at the end of the shaft.
PEDAL CRANKS
1.Push the right pedal crank forward to push the fastening tube at the front of the pedal crank into the handle.
2. Fasten the fastening tube to the handle with the screw (F). Place the decorative plug over the screw (G).
3. Repeat instructions 1 and 2 for the left handle and pedal crank.
4 . Place the plastic covers onto the handle fastening sites and fasten them with screws (H).
4
