12 STANDARD OVEN OPERATION
Adjusting the Belt Speed
PROFILE 1 | TOP AIR 80 % |
The High h Conveyor Oven can accommodate
BELT R
either one or two conveyor belts. The oven will
10:00
automatically detect the number of conveyor belts installed and display the option to change the speed of each conveyor belt independently.
1.From Figure 9, press the soft key adjacent to the conveyor belt you wish to adjust (press L2 for the front belt [Belt F] or L3 for the rear belt [Belt R]).
2.Adjust the time it takes for the conveyor belt to completely cycle through the oven.
-The up key increases bake time in
+Flex option enabled: the user can only increase the time up to an additional 15 seconds.
-The down key decreases bake time in
+Flex option enabled: the user cannot decrease the time by more than 15 seconds.
3.Press the soft key adjacent to the belt that was adjusted to exit the belt speed controls.
Adjusting the Temperature
1.Press R2 (Figure 9, page 11) to access the temperature controls.
2.Adjust the temperature (range is
Adjusting the Top and Bottom Air
1.Press R1 (Figure 9, page 11) to access the top air controls, or R3 to access the bottom air controls.
2.Adjust the air speed.
-Press the up key to increase the air speed in 5% increments up to 100%.
+Flex option enabled: the user can only increase the air speed by up to an additional 15%.
-Press the down key to decrease the air speed in 5% increments down to 30%.
+Flex option enabled: the user cannot decrease the air speed by more than 15%.
-Press the soft key again to exit the air controls.
-Press the up key to increase the temperature in 5°F/5°C increments.
+Flex option enabled: the user can only increase the temperature up to an additional 10°F/5°C.
-Press the down key to decrease the temperature in 5°F/°5C increments.
+Flex option enabled: the user cannot decrease the temperature by more than 10°F/5°C.
3.Press R2 again to exit temperature controls.
