Turbo Chef Technologies 2020 HIGH h manual Issue, Possible Causes, Resolution

1 7

Issue	Possible Cause(s)		Resolution
F5: CC Over Temp	-	Blockage of airflow into the	- Check for and remove anything that may be
		oven.		obstructing regular airflow into the oven.
	- Problem with the blower		-	Call customer service.
		motors or heater.
	-	Defective SSR.	-	Call customer service.
F6: EC Over Temp	-	Blockage of airflow into the	- Check for paper towels or anything that may
		electrical compartment.		be obstructing cool air into the electrical
				compartment.
	- Problem with the cooling		-	Call customer service.
		fans.
F7: RTD Failure	-	Damaged or defective oven	-	Call customer service.
		components.
F8: High Limit	-	Oven is not clean.	- Clean the oven following the weekly cleaning
Tripped				instructions on pages 5-7. If problem persists,
				call customer service.
F9: Belt Run	-	Too much weight on belt.	- Ensure oven is in the off state and completely
Failure				cooled and belt is completely stopped. If belt is
				overloaded, remove product from belt.
	-	Obstruction blocking belt	- Ensure oven is in the off state and completely
		rotation.		cooled and belt is completely stopped. Look
				into oven cavity and remove any obstructions
				that are blocking the belt’s rotation.
	- Damaged or defective oven		-	Call customer service.
		components.
	-	Overheated conveyor drives	- Ensure the filters are clean and fans are
				running. Also ensure ambient temperature is
				not excessive (greater than 100°F [38°C]).

T R O U B L E S H O OT I N G