Turbo Chef Technologies 2020 HIGH h Editing a Cooking Profile, Changing a Cooking Profile Name

11

Editing a Cooking Profile

To edit a cooking profile, the oven must be in the COOKING MODE and the full edit or flex option must be enabled for each option to be edited. For more information on selecting between full edit, rigid, and flex options for each editable setting, see Edit Options Screen on page 14.

When the rigid option is enabled for a given setting, the soft key adjacent to that setting (Figure 9) is disabled and no menu editing is allowed.

When the full edit option is enabled for a given setting, that setting is fully customizable and changes are saved once the oven returns to the OVEN

OFF or COOLING DOWN MODE.

When the flex option is enabled for a given setting, that setting is customizable within flex option limitations (as described in the following sections), and changes will reset when the oven returns to the

OVEN OFF or COOLING DOWN MODE. NOTE: The

flex option does not apply to editing a profile name.

This section assumes that the full edit option is enabled (except where otherwise noted) and that a cooking profile and belt speed have been selected.

Changing a Cooking Profile Name

1.From the cooking screen (Figure 9), press L1 to access the name change screen (Figure 10).

2.Change the name of the cooking profile.

-The up key moves up through the available characters. e.g. A,B,C…

-The down key moves down through the available characters e.g. A,+,-, ,9,8…

-INS (L1) inserts a space.

-DEL (R1) deletes the selected character.

----> (R1) moves the cursor to the right.

-<--- (L1) moves the cursor to the left.

3.Press save (R3) to save the changes or cancel (L3) to cancel any changes.

									R1
	L1	PROFILE 1		TOP AIR 80 %	R1	L1	INS	DEL
	L2	BELT F	COOKING	SET	R2	L2	<--- [PROFILE 1	] --->	R2
		5:00		475F
	L3	BELT R			R3	L3			R3
		3:20	BTM AIR 100 %				CANCEL	SAVE
						Figure 10: Name Change Screen
Figure 9: Cooking Screen

STANDARD OVEN OPERATION