vi
RF INTERFERENCE CONSIDERATIONS
This oven generates radio frequency signals. This dev ice has been tested and determined to be in
compliance with applicable part of FCC part 18 requirements and to the protection requirements of C ouncil
Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic
compatibility at the time of m anufacture. However, some other equipment may exhibit sensitivity to signals
below these limits resulting in interference with that equipment.
If your equipment experiences interference, the following steps should be c onsidered:
1. Increase the physical s eparation between this oven and the sensitive equipment.
2. If the sensitive device c an be grounded, do so following accepted grounding practices.
3. If battery powered m icrophones are being affected, insure that the batteries are fully charged.
4. Keep sensitive equipm ent on electrically separate circuits, if possible.
5. DO NOT route interc om wires, microphone wires, or speaker cables near oven.
SAVE THESE INSTRUCTIONS