v
GROUNDING INSTRUCTIONS
This appliance MUST BE grounded. In the event of an electrical shor t circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING!!
Improper use of the grounding can result in a risk of electric shock.
Consult a qualified electrician or servicem an if the grounding instructions are not com pletely understood, or
if doubt exists as to whether the appliance is properly grounded.
DO NOT use an extension cord. If the power supply cord is too short, have a qualified electrician or
serviceman install an outlet near the appliance.

POWER SUPPLY CORD REPLACEMENT

If the power supply cord is damaged, it MUST BE replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.

General Note about Construction

Please be advised that the TurboChef C3 series ovens are manufactured in various locations, as such the
C3/C and C3/Cmulit are cons tructed using the Metric System. Therefore, it is very important to note the
model number of the unit you are servicing to ensure you get the correct Metric com ponent. Care has
been given in this manual to list the different part numbers f or the Metric and Imperial (C3/AB and C3Multi)
ovens. In addition, please note that most hardware on the C3/C and C3/Cmulti oven is metric unless
otherwise specified.
SAVE THESE INSTRUCTIONS