Turbosound NuQ SERIES user manual Hardware Compatibility, Speaker Pole and Tripod Stand Mounting

user manual

NuQ series

Hardware Compatibility

Model	NuQ-8	NuQ-10	NuQ-12	NuQ-15
Wall mount	WB-20B	WB-20B	WB-55B	WB-55B
	PB-55	PB-55	PB-55	PB-55
Flying Yokes	NuQ-FY8	NuQ-FY10	NuQ-FY12	NuQ-FY15
Swivel brackets	NuQ-SB8	NuQ-SB10	n/a	n/a
Swivel bracket	NuQ-SBE8	NuQ-SBE10	n/a	n/a
extenders
Horizontal array	NuQ-TB	NuQ-TB	n/a	n/a
OmniMount™	Series 20.5	Series 60	Series 60	Series 120

Speaker Pole and Tripod Stand Mounting

NuQ series two-way cabinets are equipped with pole mount sockets for portable use on 35mm speaker stands or poles. NuQ series bass cabinets are equipped with pole mount receptacles that allow two-way cabinets to be mounted at the correct height above the sub-bass unit.

Use with Flying Yokes

Additional pole mounting flexibility is provided by adjustable flying yokes which allow two-way speakers to be angled downwards in order to achieve better audience coverage from a simple two-way-plus-sub-bass combination. The FY-PH pole holder adapter fixes to the yoke and mounts directly on top of the speaker pole or tripod stand.

Truss Mounting

Cabinets can be rigged from standard truss systems using model-specific flying yokes and scaffold clamps. These allow virtually unlimited adjustment of rotation and downward angle to ensure accurate room coverage.

•Remove the four M10 countersunk screws on the sides of the cabinet using a 6mm Allen key

•Fit the flying yoke using the M10 bolts supplied and tighten

SC-01

Scaffold Clamp

NuQ-FY8

Flying yoke

•Attach the scaffold clamp to the top bar of the flying yoke using the M12 bolt supplied and tighten

•Mount the loudspeaker to the truss, angle and rotate as required and tighten the thumbwheels

NuQ manual page 33