Turbosound NuQ SERIES user manual From Mixer LMS-D24

user manual

NuQ series

System 2 – Stereo Passive setup with Bass Units and Active Crossover

FROM MIXER

LR

EQ

LMS-D24

MID/HI

LEFT

BASS

POWER AMPLIFIERS

MID/HI

RIGHT

BASS

In this case an LMS-D24 is used to separate the bass and mid / high frequencies and feed them to the appropriate cabinets.

This system can be scaled up with the addition of further amplifiers and processors.

By substituting an LMS-D26 processor for the LMS-D24 there will be two extra channels available for adding perhaps another pair of mid/top cabinets through an extra stereo power amplifier.

The B15 bass speakers shown are rated at 8 ohms impedance so it is possible to run two cabinets from one amplifier, providing the amplifier is powerful enough, although additional amplifiers will still provide the best performance.

It is recommended to use a bass cabinet and a mid/top with each stereo amplifier as this helps distribute the load across the power supplies better.

NB: The EQ shown is for tuning the system to the room / venue.

NuQ manual page 24