Turbosound NuQ SERIES user manual General Features for Two-Way Enclosures

Models: NuQ SERIES

1 50
Download 50 pages 23.77 Kb
Page 6
Image 6

user manual

NuQ series

General Features for Two-Way Enclosures

High-grade neodymium-magnet speaker components are matched with an internal passive crossover to ensure a seamless transition between the high frequency and low frequency drivers.

12” and 15” models are switchable active / passive via a rear panel toggle switch to enable fully bi-amplified operation.

The 1” high frequency compression driver used in the NuQ-8 and NuQ-10 is a proprietary design based on the award-winning Aspect® series HF driver.

Cabinets are constructed from high quality pre-formed birch plywood; rebated, glued and screwed together for maximum strength and rigidity. This construction method entirely eliminates four cabinet joints and reduces overall weight.

The symmetrical quasi-trapezoidal cabinet shape with 45° side angle is designed to enable reversible low profile wedge monitoring applications

Multiple rigging points enable a wide variety of installation methods: on speaker stands and poles; with Turbosound yokes and swivel brackets; with OmniMount™ hardware and specifically created Turbosound wall brackets. The enclosures are also fitted with internal M10 threaded rigging points on the top, sides, bottom and rear, that allow single cabinets to be suspended and angled in fixed installations.

The rigging points on the bottom of the cabinets enable them to be hung upside down in order to position the HF driver closer to the audience.

NuQ Series two-way enclosures are designed to give good pattern control down to crossover frequency, and are fully supported with EASE polar data (available to download from the Turbosound website at www.turbosound.com). This enables accurate and predictable results when specifying sound systems in a given venue.

NuQ manual page 6

Page 6
Image 6
Turbosound NuQ SERIES user manual General Features for Two-Way Enclosures