2.26– Installing the Power Supply

There are three power connectors on your Thunder i7505 S2665. By default, the Thunder i7505 S2665 requires that you have an EPS12V power supply that has a 24 -pin and an 8-pin power connector. The extra 6-pin AUX power connector is needed if you plan on using an AGP Pro video card. Please be aware that ATX 2.x, ATX12V and dual ATXGES (24+8 -pin) power supplies are not compatible with the board.

EPS 12V power connector

24-pin

8-pin

6-pin

power connector

power connector

power connector

 

S2665 with PCI/AGP video card

Required

Required

Not required

S2665 with AGP Pro video card

Required

Required

Required

24-pin (main power connector)

8-pin (12V power connector)

6-pin (AUX power connector)

1.Disconnect power supply from electrical outlet

2.Connect 8 -pin 12V power connector

3.Connect 6 -pin AUX power connector ( required if using an AGP pro video card)

4.Connect 24-pin main power connector

5.Connect power cable to power supply to power outlet

NOTE

NOTE

Certain EPS12V power supp lies do not have the 6-pin AUX power connector. Please check with your power supply vendors if you plan to use an AGP Pro video card.

YOU MUST unplug the power supply before plugging the 24-pin, 8 -pin and 6 -pin cables to motherboard connectors.

22

http://www.TYAN.com

Page 22
Image 22
Tyan Computer S2665, Thunder i7505 warranty Installing the Power Supply