Native Mode Operation, Sata RAID Enable | Tyan Computer S5520, Q35T

Native Mode Operation

This feature is used to choose Native Mode for ATA. However, certain OS is not supported under Native Mode.

Options: Auto / Serial ATA

SATA RAID Enable

When this option is enabled, the Silicon Image RAID BIOS is loaded on system start up, allowing for configuration of hardware RAID arrays. With the SATA RAID ROM option disabled, the drives attached to the controller can only act independently of one another.

Options: Enabled / Disabled

SATA AHCI Enable

This item allows you to enable the SATA AHCI functionality.

Options: Disabled / Enabled

SATA AHCI Legacy Enable

[Enabled]: SATA and PATA drives are auto-detected and placed in Legacy Mode.

[Disabled]: SATA and PATA drives are auto-detected and placed in Native IDE mode.

Options: Disabled / Enabled

44

Image 44

Tyan Computer S5520, Q35T warranty Native Mode Operation, Sata RAID Enable, Sata Ahci Enable, Sata Ahci Legacy Enable

Contents

Toledo q35T S5220 Version Table of Contents Board InstallationBios Setup Diagnostics Check the box contents Page Congratulations Hardware SpecificationsIntroduction Power Supply MemorySystem Management External I/O Ports Board Installation How to install our products right… the first time Board Image Block Diagram Toledo q35T S5220 Board Parts, Jumpers and Connectors Jumper Legend Jumper/Connector Function USB Front Panel ConnectorFront Panel Connector Front Panel Connector for Barebone CPUFAN1 FAN5 FAN2 FAN3 CPUFAN1/FAN2~FAN6 4-pin Fan Connector with Tachometer J24 Aux. Power Connector for Tyan Riser Card M2061LCM J30 LCM Header for Barebone TYFP1 J37 Front Panel HeaderPage USB3/USB4/USB5/USB6 USB Front Panel Connector SATA1/2/3/4/5/6 Serial ATA ConnectorFP-AUDIO J5 Front Panel Audio Connector COM2 J29 COM2 Header J52 J50 TYFP2 J28 Front Panel Connector for Barebone TYFP3 J31 Front Panel Connector for BareboneJ50/J52/TYFAN J27 Fan Connector for Barebone J50/J52 Cmos Cmos J14 Clear Cmos Jumper Normal Default Tips on Installing Motherboard in Chassis Installing the Memory Memory Installation Procedure Installing the Processor and Cooling Fan Processor Installation LGA 775 Socket Cooling Fan Installation Page Attaching Drive Cables Attaching IDE Drive Cable Installing Add-In Cards Installing Optional SO-DIMM modules Connecting External Devices Onboard LAN LED Color Definition Finishing Up Installing the Power SupplyApplying power to the board Starting Setup Bios SetupAbout the Bios Getting Help Case of ProblemsSetup Variations Main Bios Setup System Time / Date setup Installed Memory/Available to OS/Used by devicesMain Legacy Diskette a Multi-Sector Transfers LBA Mode ControlType Bit I/O Transfer ModeUltra DMA Mode Memory Cache Cache System Bios AreaCache Video Bios Area Cache Extended Memory Area Cache Base 0-512KCache Base 512-640K Boot Features Halt on ErrorsKeyboard Error Report Boot-time Diagnostic Screen QuickBoot Mode Extended Memory Testing Reset Configuration Data Large Disk Access ModeEnables support for legacy USB Options Enabled / Disabled Advanced Advanced Chipset Control WatchDog ModeWatchdog Timer Default Primary Video Adapter Dvmt 4.0 ModeEnable Multimedia Timer Memory Reclaiming Native Mode Operation Sata RAID EnableSata Ahci Enable Sata Ahci Legacy Enable Options Fun #0, 1, 2, 7 / Fun#0, 7 / Fun#0, 1, 7 / Disabled Integrated Device Control Sub-MenuUSB Dev #29 Controls Dev #29 USB Dev #26 Controls Dev #26 LAN1 / LAN2 Option ROM Scan Initialize device expansion ROM Options Disabled / EnabledLAN Control Sub-Menu PCI Express Sub-Menu Read only PCI-E1 Sub-Menu PCI Express Graphics Port PCI-E2 Sub-Menu PCI Express Port #1 Single Logical Proc. Mode Advanced Processor OptionsThis section allows you to fine-tune the processor options Hyperthreading C1 Enhanced Mode No Execute Mode Mem ProtectionProcessor Power Management Peci Interface Device Configuration Floppy disk ControllerSerial Port A/B Base I/O Address DMI Event Logging Event Log CapacityEvent Log Validity View DMI Event Log FAN Fail LED Indicator Hardware MonitorItems can not be modified in user mode. Read only Auto Fan Control Voltage Monitoring Sub-Menu Ipmi Specification Version / BMC Firmware Version Bios Post ErrorsIpmi System Event Logging Bios Post Watchdog OS Boot WatchdogTimer for loading OS SEC Watch dog timer value Options 10 System Event Log list mode Sub-Menu V5VSB Realtime Sensor Data Sub-Menu Systemp Flow Control Enables Flow Control Console RedirectionCom Port Address Baud Rate Security Power Boot Boot Priority OrderIt shows the boot priority for installed devices Excluded from boot order Exit Diagnostics Beep CodesFlash Utility Memory, Video, CPU Phoenix Bios Post Code Code Beeps / Description Bios shadow Caches 30h Code Beeps / Description Appendix Smdc Information Overview Features of Tyan Server Management How Smdc and TSO Work Glossary Page Page Mirroring see RAID Page Striping see RAID Technical Support Returning Merchandise for Service Document # D1922-110