Tyan Computer S5520 Ipmi Specification Version / BMC Firmware Version, System Event Logging

3.4.6 IPMI

This section allows you to configure the IPMI settings. (This submenu will appear when an IPMI card is installed.)

		PhoenixBIOS Setup Utility
	Main	Advanced	Security	Power		Boot	Exit
		IPMI			Item Specific Help
X System Event Log					Display the System
X System Event Log (list mode)					Event Log
X Realtime Sensor Data
IPMI Specification Version			2.0
BMC Firmware Version			0.00.00000000
System Event Logging			[Enabled]
Clear System Event Log			[Disabled]
Existing Event Log number			7
Remaining Event Log number			(unknown)
Event Log Control			[Disabled]
SYS Firmware Progress
BIOS POST Errors			[Enabled]
BIOS POST Watchdog			[Disabled]
OS boot Watchdog			[Disabled]
Timer for loading OS (SEC)			[10]
Time out action			[No action]
F1	Help	↑↓ Select Item	-/+Change Values			F9 Setup Defaults
Esc	Exit	← → Select Menu	Enter Select	X Sub-Menu		F10 Save and Exit

IPMI Specification Version / BMC Firmware Version

It displays the version of the IPMI Specification and BMC Firmware. (Read only)

System Event Logging

Select [Enabled] to allow logging of system events.

Options: Enabled / Disabled

Clear System Event Log

When set to [Enabled], system event log will be cleared.

Options: Disabled / Enabled

Existing Event Log number / Remaining Event Log number

It displays the number of existing event logs and remaining event logs. (Read only)

SYS Firmware Progress

It records the continual development of BIOS POST.

Options: Disabled / Enabled

BIOS POST Errors

Enabled -> BIOS will halt & display error message if there is any POST error . Disabled -> BIOS will not halt if there is any POST error.

Options: Disabled / Enabled

56