JP1/JP2: COM2 Function Switch Jumper
1
Pin
1
Pin
JP3: Clear CMOS Jumper
1 3
Normal (Default)
13
Clear CMOS
You can reset CMOS by using this jumper if you have forgotten your system/setup password or need to clear BIOS setting.
1.Power off system and disconnect both power connectors from the motherboard.
2.Use jumper cap to close Pin_2 and Pin_3 for seconds to Clear CMOS.
3.Put jumper cap back to Pin_1 and Pin_2 (default setting).
4.Reconnect power & power on system.
JP6: Front Panel ID LED Button
1
Use this header to disable the ID LED.
JP7: Chassis Intrusion Header
1
Use this header to trigger the system chassis intrusion alarm.
21
http://www.tyan.com