Trimming Settings
Set the print style before you start with the trimming settings.
1. In the print setting menu, turn the SET dial to select [TRIMMING] and press the SET dial.
The trimming frame appears.
2. Change the size of the trimming frame.
W
• Move the zoom lever toward T to shrink the frame, and | T |
toward W to enlarge the frame. |
|
• To cancel the trimming settings, move the zoom lever toward |
|
W until the trimming frame disappears. |
|
3. Move the trimming frame.
T
• Turn the SET dial to move the frame. Press the SET dial to switch between the directions (up/down or right/left) and the orientation of the frame (vertical/horizontal).
• Pressing the MENU button brings you back to the print settings menu.
❍About the color of the trimming frame (Canon
- White: No trimming settings.
-Green: Recommended trimming size. (The trimming frame may not appear in green depending on the image size, paper size or borders settings.)
-Red: The image is magnified beyond recommended size. The image may print out coarsely.
❍The trimming setting applies only to one image.
❍The trimming setting is canceled with the following operations:
-When you turn off the camcorder.
-When you disconnect the interface cable.
-When you expand the trimming frame beyond its maximum size.
E 
Direct Printing
131
