CO75:
NOTE: The grille should not yet be installed. If it has been installed, remove it for door reversing.
To reverse the door on black models:
ULIN_0218_A
Figure 30
1.Remove top hinge from cabinet (four screws) (Figure 30). Hold door to keep it from falling.
2.Lift the door off the bottom hinge.
Figure 32
4.Remove four plastic plugs in hinge holes, invert screw and reinstall pivot screw in top hinge (Figure 32). Do not install hinge on cabinet at this time.
ULIN_0220_A |
Figure 33
5.Remove bottom hinge from cabinet (four screws) and screws on opposite side of cabinet (Figure 33).
6.Remove pivot screw from bottom hinge, invert screw and reinstall pivot screw in hinge (Figure 32).
ULIN_0221_A
ULIN_0219_A
Figure 34
Figure 31 | 7. Install bottom hinge on cabinet, opposite side, aligning | |||
flat edge of hinge with outer edge of unit. Partially | ||||
| ||||
3. Remove four plastic plugs in hinge holes, top of cabinet, | tighten screws (Figure 34). | |||
opposite side, being careful not to scratch cabinet |
|
|
| |
(Figure 31). |
|
|
| |
| Hinge |
|
| 1 |
|
|
|
| |
Plastic |
|
| Plastic |
|
Plug Hole |
|
| Plug Hole |
|
| Screw |
|
|
|
Right Side |
|
| Left Side | ULIN_0222_A |
Door Swing |
|
| Door Swing | |
|
|
| ||
Right Side | Invert | Invert |
| Figure 35 |
Hinge | Screw | Hinge |
|
|
|
|
| ULIN_0106_A |
|
16 |
|
| CO29, CO75 |
|
