Uniden 7500AI manual Setting UP, Security Code, LCD Contrast, Call Breakthrough CBT Code

SETTING UP

NOTE: If you do not complete each step within 8 secs., the 7500AI will exit set-up mode and

return to standby. In this case you have to start again by pressing STOP for 2 secs.

LCD CONTRAST

The 7500AI provides 0 to 9 (lightest to darkest) levels LCD luminescence.

1.Press STOP for 2 secs. The 7500AI beeps to confirm entry to set-up mode.

2.	Press REPEAT to adjust contrast		AM	CALL#
	to desired level.		OGM1 OGM2	NEW
3.	Press CALLBACK to save setting	LCD CONTRAST
	and continue setting up.

NOTE: You can press STOP anytime to exit set-up mode.

SECURITY CODE

This code is needed for remote operation (refer to page 29 for details).

1. Press STOP for 2 secs.

AM	CALL#
	NEW

2.Press CALLBACK.

3.Press REPEAT to select desired number and SKIP to move up to the next digit.

OGM1 OGM2

SECURITY CODE

4. Press CALLBACK to save setting and continue to next step.

CALL BREAKTHROUGH (CBT) CODE

This code is needed to alert the user to urgent calls (refer to page 28 for details).

1.Press STOP for 2 secs.

2.Press CALLBACK 2 times.

11