Uniden 7500AI manual Deleting Calls and Messages, Deleting Messages

BASIC OPERATION

DELETING CALLS AND MESSAGES

The 7500AI gives the user an option to delete calls and messages one at a time or all at the same time.

Deleting Calls

To delete a particular Caller ID (CID):

1.Set the display showing the CID to be deleted using REPEAT or SKIP.

2.Press DELETE once. The 7500AI deletes the displayed CID, then shows the next.

To delete ALL the CID:		CALL#
	Press STOP to return to stand-by mode.	PM
1.		OGM1 OGM2 ANS ON
2.	Press and hold DELETE until display	▲ CID ▼MSG
	shows.

3.Press REPEAT (▲). A confirmation beep sounds.

4.Press STOP to return to stand-by mode. Otherwise, the 7500AI automatically goes to stand-by after 8 secs.

Deleting Messages

To delete a specific message, press DELETE once while the message is playing. The 7500AI beeps once and deletes the current message, then plays the next.

To delete ALL the Messages:

1.	Press STOP to return to stand-by mode.	CALL#
2.	Press and hold DELETE until display	PM
		OGM1 OGM2 ANS ON
	shows.
3.	Press SKIP (▼). A confirmation beep	▲ CID ▼MSG
	sounds.

4.Press STOP to return to stand-by mode. Otherwise, the 7500AI automatically goes to stand-by after 8 secs.

NOTE: The 7500AI does not delete calls and messages that have not been played to the end.

If you have calls and messages that have not been played, the 7500AI sounds four

beeps. Deleted messages and calls are permanently deleted. It is recommended to

delete your messages regularly to avoid filling up your message memory.

BASIC OPERATION

27