3.Connect the other end of the USB cable to the computer’s USB port or to an AC or DC adapter that provides USB charging power.
Note: If you connect to a computer’s USB port, the PC will prompt you for the drivers for your scanner. To download and install these drivers, go to http://info.uniden.com/UnidenMan4/ BC75XLT.
4.The scanner displays CHArg and the low battery icon while it charges the batteries. The screen goes blank after the scanner is completely charged.
Different status messages may display, depending on the battery type and scanner status:
LCD Message | Batt.. | Meaning | Scanner |
| Type |
| Cond.. |
|
|
|
|
CHArg | Scanner is charging. | Off | |
|
|
|
|
None | Unit is charged. | Off | |
|
|
|
|
None | Scanner is not | Off | |
|
| charging (Battery |
|
|
| selection switch is |
|
|
| set to Alk.) |
|
|
|
|
|
Err CHArg | Batteries cannot | Off | |
|
| be charged (dead |
|
|
| battery). |
|
|
|
|
|
ILEgAL | USB external power | Off | |
|
| is out of range. |
|
If the batteries are good, the scanner charges the batteries. and it operates normally. If the scanner cannot immediately
26
