scanner beeps twice and CLEAr displays. Press E to unlock all.

Notes:

You cannot lock out frequencies during WX service search.

Locked out frequencies are shared between Service Search, Custom Search, Quick Search, and Close Call modes. If

locked out frequencies are set in a specific mode, those frequencies are also skipped in other Search (except WX Service Search) and Close Call modes.

If you selected all frequencies in a search band to be skipped, the scanner beeps 3 times and does not search.

You can skip 100 frequencies for Temporary Lockout and 100 frequencies for Permenant Lockout (200 locked out frequencies total). After locking out 200 frequencies, the next time you try to select a frequency to skip the scanner displays Full and will not lock out that frequency.

If you want to find your locked-out frequencies, press Hold and then turn the scroll control knob to cycle through the frequencies. L/O or T/LO displays on the locked out frequencies.

Priority

The Priority feature lets you scan through the channels and still not miss important or interesting calls on specific channels. There are three Priority options available in Scan or Scan Hold mode:

Priority Off (no display) : The scanner does not check for priority channels.

Priority DND ( PRI displays) : In Priority Do Not Disturb (DND), the scanner checks Priority channels

46

Page 46
Image 46
Uniden BC75XLT owner manual Priority, You cannot lock out frequencies during WX service search