If you entered a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press ..Clr twice to clear the frequency and enter a different one. To enter the frequency anyway, press E to accept.
Erasing a Stored Frequency
1.Find the frequency you want to erase. Press Hold.
2.Press Func + Pgm.
3.Press 0 and then press E.
4.The displayed frequency changes to all 0s.
Scanning
When you store frequencies into channels, those channels are grouped into banks. Each bank contains 30 channels. You can store service channels and
While you are scanning frequencies stored in the banks, the word SCAN scrolls across the display. When it finds a transmission, that frequency displays.
Enabling/Disabling Channel Banks
You can enable and disable each channel bank. When you disable a bank, the scanner does not scan any of the 30 channels in that bank.
In Scan modes, press the number key that corresponds to the bank you want to disable or enable. That bank number
39
