Display Description, To Close Call mode | Uniden BC75XLT specs

Line	Display	Description
2	F	Displays when the Function mode
		is on.
	▲SEARCH▼	Displays during Search mode.
	DLY	Displays when a 2-second delay
		at the end of a transmission is on.
	/	Displays when the scanner is set
	/	to Close Call mode:
		to Close Call mode:
		- Close Call Priority
		- Close Call Do Not Disturb
		Displays and blinks when the
		battery power gets low.
		Displays when the rechargeable
		batteries are charging.
	T L/O	Indicates a locked out frequency.
	L/O	T L/O: Temporary Lock Out
		L/O: Lock Out
3	P	Displays when a Priority channel
		is selected.
	888	Current channel number.
	PRI	Displays when the Priority feature
		is active.
	888.888	Current frequency.
	25, 33, 50, 66, 75 One of these numbers displays to
		indicate the frequency step. For
		example, “25” indicates 0.25kHz.

33

Image 33

Uniden BC75XLT owner manual Display Description, To Close Call mode

Contents

BC75XLT Owner’s Precautions Page Contents Page Unlock Priority Delay Keylock Backlight PC Programming FCC Wants You to Know Scanning Legally Page Introduction BC75XLT Feature HighlightsPage Page Frequency Range USA Band Plan Frequency Range MHz Step Mode kHz Transmission Step Mode Transmission MHz KHz Canada Band Plan What is Scanning? What is Searching?Scanning basics Simplex Operation Conventional Scanning What Are Banks? Service Search BandsRepeater Operation Channel Storage Banks Custom Search Ranges Where To Learn More What’s In The Box? Setup Connect the Antenna Setting Up the Scanner Connecting an Optional Extension Speaker Adjusting the Belt ClipConnect an Optional Earphone/Headphone Installing Rechargeable 2300mAh Ni-MH Batteries Installing Non-Rechargeable Batteries Charging the Ni-MH Batteries through USB Connection LCD Message Batt Meaning Scanner Type Cond Turn On The Scanner Low Battery Alert Adjusting for Interference Adjust Squelch Hardware Description BC75XLT Controls and DisplayKeypad Key/Icon Primary Function Key Hold Srch/Svc Key/Icon Primary Function Key ScanPri Dly Pgm/E Key/Icon Primary Function Key PSrcClr Func Line Display Description LCD Display Display Description To Close Call mode Search Hold modes Operation SearchINGQuick Search Custom Search Service Search Storing Frequencies Erasing a Stored Frequency ScanningPress Func + Pgm Enabling/Disabling Channel Banks Manually Select a Channel Scan the Stored ChannelsPage Close Call RF Capture Close Call Operation Mode Band Range MHz To turn a Close Call Low High Using Close Call Mode Locking Out Channels and Frequencies Temporary Lock Out Permanent Lock OutUnlock Priority You cannot lock out frequencies during WX service search Delay Keylock Mode Delay Specification PC Programming Backlight Problem Possible Cause Suggestion Troubleshooting Problem Possible Cause Suggestion Problem Possible Cause Suggestion Resetting the Scanner Care and MaintenanceGeneral Use Location Cleaning RepairsBirdies Page Specifications Seconds Warrantor Uniden America Corporation Uniden One-Year Limited Warranty Procedure for Obtaining Performance of Warranty