Uniden D2998-6, D2998-4 manual Getting Started, Set Up the Base, Attach the Stand, Remove the Stand

Getting Started

Set Up the Base

Attach the Stand

For desktop use

For wall mount use

DESK DESK

WALL

WALL

DESK

WALL

WALL

DESK

1.Turn the stand so the word Desk is right-side up (it will be on the left).

2.Insert the tabs into the notches at the top of the base.

3.Press in on the latches and slip them into the notches marked Desk.

1.Turn the stand so the word Wall is right-side up (it will be on the left).

2.Insert the tabs into the notches at the bottom of the base.

3.Press in on the latches and slip them into the notches marked Wall.

Remove the Stand

Press in on the latches and slide them out of the notches.

Connect the Corded Handset

Use the coiled cord to connect the corded handset to the connector on the left side of the base.

For wall mount use only

1.	On the front of the base, slide the clip
	out of its slot.
2.	Rotate the clip 180 degrees.	1
3.	Flip it from front to back and slide it
		2

back into the slot.

3

English - 3