Uniden D2998-6, D2998-4 Using the System While Youre Away from Home, Programming a Security Code

Using the System While You're Away from Home

You can also operate your answering system from any touch-tone phone. Before you can use this feature, you have to program a security code.

Programming a Security Code

1.With the phone in standby, open the menu. Select Ans. Setup, then select Security Code.

2.Use the number keypad to enter a two-digit security code (01 to 99). Press

Select/menu when you’re finished.

##Remember to make a note of your new security code!

Dialing in to Your System

1. Call your telephone number and wait for the system to answer.

-- If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new messages and 4 rings if you don’t. You can hang up during the third ring.

-- If your answering system is off, it will answer after about 10 rings and sound a series of beeps instead of your greeting.

2.During the greeting (or beeps), press 0 and immediately enter your security code. (If you enter it incorrectly 3 times, the system hangs up and returns to standby.)

3.The system announces the time, the number of messages in memory, and a help prompt. It beeps intermittently to let you know it's waiting for a

command.	01	Repeat message	05	Stop playback
4. When you hear
	02	Play message	06	Turn the system on
beeping, enter a 2-digit
	03	Skip message	09	Turn the system off
command from the
chart:	04	Delete message	10	Hear help prompts

##If you don't press any keys for 15 seconds, the phone will hang up and return to standby.

English - 21