Connect the base unit and charge the handset

1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2) Place the handset in the base unit with the keypad facing forward.

NOTE: The rechargeable

battery is already installed in your phone.

3)Make sure that the charge LED illuminates.

If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

4)Charge your handset at least 15-20 hours before plugging into the phone line.

5)Once the handset battery

pack is fully charged, connect the telephone line cords to the TEL LINE jack and to a telephone outlets.

note

Use only the supplied

AD-800 AC adapter. Do not use any other AC adapter.

•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

•Don't place the base in direct sunlight or subject it to high temperatures. The battery may not charge properly.

If your telephone outlet isn't modular, contact your telephone company for assistance.

Setting up the Phone

w w w . u n i d e n . c o m

S e t t i n g u p t h e P h o n e [ 8 ]

Page 9
Image 9
Uniden DMX 776 owner manual Connect the base unit and charge the handset